VectorLFO - djphazer/O_C-Phazerville GitHub Wiki

Vector LFO is a dual low-frequency oscillator based on Vector Oscillator waveforms. There is a variety of built-in waveforms from which to choose, or you can create your own with the Waveform Editor.

I/O

	1/3	2/4
TRIG	Sync Clock Ch1	Sync Clock Ch2
CV INs	Freq mod Ch1	Mix Ch1 into Ch2
OUTs	LFO Ch1	LFO Ch2 + Ch1 mix

UI Parameters

• LFO 1 frequency
• LFO 1 waveform select
• LFO 2 frequency
• LFO 2 waveform select

The LFO range is from .10Hz to 999Hz.

Output A/C and LFO 1

Output A/C is a the output of only LFO 1. LFO 1 can be synchronized with an external clock at Digital 1, and its frequency can be modulated over a 30Hz bi-polar range with CV 1.

Output B/D and LFO 2

Output B/D is a mixed output. By default, it is 100% LFO 2. Increasing voltage to CV 2 mixes in the LFO 1 signal up to a max of 50%/50% of each.

Manual Oscillator Reset

When a new waveshape is selected from the panel, both LFO 1 and LFO 2 will be reset to the beginning of their respective cycles.

VectorLFO is in Hemisphere Suite starting with v1.6.