VectorEG - djphazer/O_C-Phazerville GitHub Wiki

VectorEG is a dual AR envelope generator based on Vector Oscillator waveforms. There is a variety of built-in waveforms from which to choose, or you can create your own with the Waveform Editor.

I/O

	1/3	2/4
TRIG	Gate Ch1	Gate Ch2
CV INs	N/A	N/A
OUTs	Ch1 EG	Ch2 EG

Controls

• Channel 1 EG Frequency
• Channel 1 waveform selection
• Channel 2 EG Frequency
• Channel 2 waveform selection

The EG runs freely until it gets to the second-to-last segment, and sustains at that point. When released, it proceeds to the level of the final segment at the speed specified by the final segment.

Unlike a traditional envelope generator, the speed of the envelope is determined with a single frequency control. The higher the frequency, the faster the envelope will run.

The outputs are uni-polar, and with positive offset, so that a level of -128 in the Waveform Editor corresponds to 0V, and a level of 127 is 5V.

VectorEG is in Hemisphere Suite starting with v1.6.