Sonoff POW, S31, Teckin Plugs (Power Monitoring) - digiblur/Tasmota GitHub Wiki

Sonoff POW, S31, Teckin Plugs (Power Monitoring)

Copy the below example into configuration.yaml under the sensor section. You can only have one sensor section in the configuration. You can remove any sensors below you don't need in Home Assistant.

sensor:
  - platform: mqtt
    name: "Washer Watts"
    state_topic: "tele/SNF-Washer/SENSOR"
    value_template: "{{value_json['ENERGY'].Power }}"
    qos: 2
    unit_of_measurement : "W"
    icon: mdi:flash-circle
    availability_topic: "tele/SNF-Washer/LWT"
    payload_available: "Online"
    payload_not_available: "Offline"
  - platform: mqtt
    name: "Washer Voltage"
    state_topic: "tele/SNF-Washer/SENSOR"
    value_template: "{{value_json['ENERGY'].Voltage }}"
    qos: 2
    unit_of_measurement : "V"
    icon: mdi:flash-circle
    availability_topic: "tele/SNF-Washer/LWT"
    payload_available: "Online"
    payload_not_available: "Offline"
  - platform: mqtt
    name: "Washer Amps"
    state_topic: "tele/SNF-Washer/SENSOR"
    value_template: "{{value_json['ENERGY'].Current }}"
    qos: 2
    unit_of_measurement : "A"
    icon: mdi:flash-circle
    availability_topic: "tele/SNF-Washer/LWT"
    payload_available: "Online"
    payload_not_available: "Offline"
  - platform: mqtt
    name: "Washer Energy Today"
    state_topic: "tele/SNF-Washer/SENSOR"
    value_template: "{{value_json['ENERGY'].Today }}"
    qos: 2
    unit_of_measurement : "kWh"
    availability_topic: "tele/SNF-Washer/LWT"
    payload_available: "Online"
    payload_not_available: "Offline"
  - platform: mqtt
    name: "Washer Energy Yesterday"
    state_topic: "tele/SNF-Washer/SENSOR"
    value_template: "{{value_json['ENERGY'].Yesterday }}"
    qos: 2
    unit_of_measurement : "kWh"
    availability_topic: "tele/SNF-Washer/LWT"
    payload_available: "Online"
    payload_not_available: "Offline"```

If you want to control the relay(s) of the device consult the configuration examples for relays.