Smart Standing Fan 2 Lite - dhewg/esphome-miot GitHub Wiki

aka dmaker.fan.1c see https://github.com/dhewg/esphome-miot/issues/33

WIP

Step by step:

  1. open up the Fan, flip the pcb
  2. Connect your programmer accordingly image
  3. open up esptool and ensure the flash size is accordingly: (in our case it is 2mb) image
  4. create a bin file in esphome with following code and fill in proper values for "name","friendly_name","key" :

use code from https://github.com/dhewg/esphome-miot/issues/33#issuecomment-2567119135

  1. after compiling the .bin file from esphome, flash it either with esptool or the esphome gui image image