AstrAlim V1.0

PCB

• https://github.com/dgedgedge/AstraDIY/tree/main/PCB/AstrAlim__V1.0

Issues:

• Space between Jack (I2c/1wire) connector is a bit tight => the male connector have to be thin.
• Connector for the GPS is the "wong way" => Connectors for the GPS reference have to be un-soldered and soldered back n the other side.
• Note: Incompatible with AstrOnStep for the power transmission.
• For the 9V/5V generation it is important to set either 9 or 5V or disable. Consequence for not doing that is killing a capacitor.

AstrAlim V1.1

PCB

• https://github.com/dgedgedge/AstraDIY/tree/main/PCB/AstrAlim_V1.1

Issues:

• Ina ref was changed, and badly connected => it shall INA shall be removed.
• The GPS connector was turned but the hole for mechanics was not moved => it is not correctly centered.
• Power transmission to AstrOnStep is correct.
• For the 9V/5V generation it is important to set either 9 or 5V or disable. Consequence for not doing that is killing a capacitor.

AstrAlim V1.2 TBD.

PCB

Issues: