GPS recording settings - devemux86/cruiser GitHub Wiki

The GPS recording settings of Cruiser can be accessed via [ Main ] > "Settings" > "GPS recording".

Automatic recording of track

  • Activated - A GPS track of your journey is recorded during navigation (and also in follow mode).
  • Deactivated - No GPS recording is done.

Show track on map

  • Activated - A recorded GPS track will be displayed on the map. This allows you to see the route traveled right away during navigation/follow mode, but also to have a nice overview of where you've been after your ride is finished.
  • Deactivated - Any possibly recorded GPS tracks are not displayed visually.

GPS recording > Appearance

Track color

Defines the color in which recorded tracks are displayed on the map. In addition to predefined colors from a dropdown, you can freely define your own custom color in RGB style.

Track width

Defines the track width of a displayed GPS track.

  • Possible range: 1-24 px

Direction arrows

  • Activated - Small arrows indicating a track's direction are displayed on the map.
  • Deactivated - No direction indicators are shown.

Dashed line

  • Activated - Tracks are displayed as dashed lines on the map.
  • Deactivated - Solid lines are used to show tracks.

GPS recording > Filters

Time interval

Defines the time between two recorded GPS signals.

  • Possible range: Off; 0-60 s

Distance interval

Defines the distance between two recorded GPS signals.

  • Possible range: Off; 0-50 m

Maximum GPS accuracy

Defines which GPS signals are recorded. When set to a low(er) value, only very accurate GPS locations are taken into account.

  • Possible range: Off; 0-100 m

Minimum speed

Defines the min. speed where GPS signals are being recorded.

  • Possible range: Off; 0-10 km/h
⚠️ **GitHub.com Fallback** ⚠️