Electronic parts - deltarobotone/hardware_parts GitHub Wiki
There are many options to get a circuit board from the internet. We checked two ways to get this board. In the history of developing Delta-Robot One the PCB was produced by beta-layout.com so we can recommend this shop because of the excellent quality and a professional way to get it. A quite easier and a little bit cheaper way is to use the service from aisler.com. We uploaded our board to the aisler.com page. So you only have to follow the link and create an account to order the board for a good price.
Option aisler.com
>>>Use this link to get the board<<<
Option beta-layout
To get the One Circuit Board PCB of Delta-robot One from beta-layout go to https://us.beta-layout.com/pcb/ upload the Extended Gerber RS-274X and take the requiered configurations on the page. It is recommended to use the basic and prefilled configuration from beta-layout.
Configuration:
Rigid PCB with 2-Layers
Dimensions:
Length in inches: 3.94
Width in inches: 3.94
Silkscreen: yes on both sides
Material:
FR4, 35 µm Cu, 0.0629 inch
| Number | Position | Part | Image | Source | Provider |
|---|---|---|---|---|---|
| 1x | PCB-Layer | One Circuit Board | .PNG) |
Extended Gerber | PCB-Service |
| 1x | ->J4 ->J5 |
Arduino UNO Rev3 SMD |
.PNG) |
Link | Reichelt.com |
| 5x | Q1, Q2, Q3, Q4, Q5 |
Transistor NPN BC 368 |
.PNG) |
Link | Reichelt.com |
| 1x | Q9 | Transistor PNP BC 369 |
|
Link | Reichelt.com |
| 3x | LED1, LED2, LED3 |
RGB-LED | .PNG) |
Link | Amazon.com |
| 8x | R1, R2, R3, R4,R5, R6, R7, R8 |
Resistor 10 kohm |
.PNG) |
Link | Reichelt.com |
| 5x | R9, R10, R11, R12, R13 |
Resistor 2 kohm |
.PNG) |
Link | Reichelt.com |
| 6x | R14, R15, R16, R20, R21, R22 |
Resistor 100 ohm |
.PNG) |
Link | Reichelt.com |
| 3x | R17, R18, R19 |
Resistor 150 ohm |
.PNG) |
Link | Reichelt.com |
| 1x | R23 | Resistor 680 ohm |
.PNG) |
Link | Reichelt.com |
| 1x | Switch | Switch | .PNG) |
Link | Reichelt.com |
| 1x | J2 | 4-Pin socket | .PNG) |
Link | Conrad.com |
| 1x | J3 | 6-Pin socket | |
Link | Conrad.com |
| 1x | J1 | 8-Pin socket | |
Link | Conrad.com |
| 3x | Q6, Q7, Q8 | MOSFET IRFU 4105Z |
.PNG) |
Link | Reichelt.com |
| 2x | S1, S2 | Button | .PNG) |
Link | RS-Components.com |
| 2x | ->S1 ->S2 |
Button cap | |
Link | Conrad.com |
| 1x | Powerplug | Powerplug 2.1 mm |
.PNG) |
Link | Reichelt.com |
| 1x | S3 | Rotary encoder | .PNG) |
Link | Reichelt.com |
| 1x | ->S3 | Encoder cap | |
Link | Reichelt.com |
| 2x | J4, J5 | 20-Pin header straight |
.PNG) |
Link | Reichelt.com |
| 1x | ServoA, ServoB, ServoC |
20-Pin header angled |
.PNG) |
Link | Reichelt.com |
| 4x | C1, C2, C3, C4 |
Capacitor 1000 uF @ 10 V |
.PNG) |
Link | Reichelt.com |
| 1x | ->J2 | Display I2C | .PNG) |
Link | Reichelt.com |
| 1x | - | Powersupply 5V 4A |
.PNG) |
Link | Reichelt.com |
| 1x | - | USB-Cable A to B | |
Link | Reichelt.com |
| 3x | ->ServoA ->ServoB ->ServoC |
Servo Tower Pro MG92 or MG91 +Servohorn |
.PNG) |
Link | Mouser.com |
| 1x | ->J3 | HM-10 Bluetooth |
.PNG) |
Link | Amazon.com |
| 1x | ->J1 | Electro Magnet | .PNG) |
Link | Mouser.com |