Step 3: Assembly - deltarobotone/conveyor_system GitHub Wiki

Welcome to the conveyor system assembly. This page is a step by step tutorial to build this system. Usually you need 1 hour. Please check your tools and your parts before you start with the conveyor system assembly task.

Step 3.1: Preparing of drums

Step 3.2: Assembling of drum carry frame

Step 3.3: Drive and drive drum assembly

Step 3.4: Insert drum stretcher frame

Step 3.5: Insert top frame

Step 3.6: Side frame assembly

Step 3.7: Mount the system on conveyor layer

Step 3.8: Drum stretcher assembly

Step 3.9: Mounting walls for sorting area

Congratulations! You have assembled the conveyor system successfully!

<- Back Step 2: Check your parts

Next -> Step 4: Control with Delta-Robot One