Hardware: BECom - dalathegreat/Battery-Emulator GitHub Wiki

Hardware basics

The BECom hardware is an open source hardware design created specifically for the Battery-Emulator project. It aims to ? TODO ADD DESCRIPTION OF BOARD

Interfaces

The board has IO for 2x CAN batteries, along with contactor control for each battery. It also features a CAN interface for the inverter, and a Modbus RS485 connector. The inverter comms (CAN and RS485) are electrically isolated

Hardware info

The hardware has more details on this Github page** TODO WHERE IS LINK?**

Purchase link

TODO?

[!NOTE] This has an included Antenna that needs to be mounted for good Wifi performance. Failure to install this will lead to connectivity issues

Installing the software

Follow the quickstart guide to install the Battery-Emulator software onto the board for the initial setup

Over the air (OTA) software updates

When updating this board OTA, be sure to select the software marked for this board. The files will be marked like this, signaling that this is T-2CAN hardware

BE_vX.Y.Z_BECom.ota.bin