Navigate TurtleBot3 - cyberbotics/webots_ros2 GitHub Wiki

Before proceeding, make sure you have the webots_ros2 package installed — Getting Started.

In this tutorial, we want to show you how to navigate TurtleBot3 Burger in Webots simulation. You will see that Webots uses a standard ROS2 interface that can be used with the TurtleBot3 Navigation2 package without modifications.

sudo apt install ros-${ROS_DISTRO}-turtlebot3-navigation2

source /opt/ros/${ROS_DISTRO}/local_setup.bash

# Retrieve the sources
cd /path/to/ros2_ws
git clone -b ${ROS_DISTRO}-devel https://github.com/ROBOTIS-GIT/turtlebot3.git src/turtlebot3

# Check dependencies
rosdep update
rosdep install --from-paths src --ignore-src --rosdistro ${ROS_DISTRO}

# Building packages
colcon build --packages-up-to turtlebot3_navigation2
source install/local_setup.bash

Once the turtlebot3_navigation2 package is ready you can launch a Webots simulation:

ros2 launch webots_ros2_turtlebot robot_launch.py nav:=true

This will run RViz and the Navigation 2 package in addition to the Webots simulation. The map file is provided to the launcher file and is centered and rotated to match the robot's initial position. The initial position is therefore (x=0.0, y=0.0, yaw=0.0) and is provided to the navigation package in the configuration file nav2_params.yaml. Once every node is started, you can choose a goal position and orientation with the Navigation2 Goal button in RViz. The robot will plan a trajectory and move to the pose you defined inside Webots and RViz.

On the official TurtleBot3 website you can find more information about navigation.