Type	Confirmed models	Entities / features
Wi-Fi light	Any AiDot / Leedarson RGB, RGBW, CCT, or dimmable-white bulb	light - on/off, brightness, color, color temperature
IPC camera	M3 Pro (LK.IPC.A000088), L2 battery (LK.IPC.A001513), PTZ model (LK.IPC.A001064)	See camera entities below

| Gateway / hub | A BLE hub on the account (a B1 Plus, say) | Listed by the account but gets no device and no entities here, and the lights behind it are not reachable through this integration (BLE-mesh support was dropped); the hub still works from the AiDot app. From 2.36.0 it is listed under unclaimed in the integration's Diagnostics, with why |

In Home Assistant the cameras and lights nest under one AiDot account device; that is the only hub-shaped device the integration creates.

Any AiDot or Leedarson device not listed here should still work - the table reflects only what has been explicitly confirmed. If you have a working model that isn't listed, please open an issue so it can be added.

Entity	Description	Default
camera	Live WebRTC stream and snapshots	Enabled
event.motion	Fires on motion or person detection (motion / person event types)	Enabled
binary_sensor.occupancy	True while the most recent motion event is recent	Enabled
sensor.battery	Battery percentage (battery-powered models)	Disabled
sensor.sd_card_status	SD card - whether a card is fitted: Card in slot / Slot empty	Disabled
sensor.wifi_rssi	Camera Wi-Fi signal strength (dBm) - handy for diagnosing a buffering/jittery camera	Disabled
switch.motion_detection	Enable / disable motion detection	Enabled
switch.status_led	Camera status LED	Enabled
switch.microphone	Microphone (audio privacy) - OFF disables ALL camera audio (recordings + two-way talk), camera-wide	Enabled
switch.<camera>_human_detection	Human detection -- the camera reports a person rather than plain motion. Mains cameras.
switch.<camera>_vehicle_detection	Vehicle detection. Mains cameras.
switch.<camera>_package_detection	Package detection. Mains cameras.
switch.<camera>_pet_detection	Pet detection. Mains cameras.
switch.<camera>_auto_siren	Automatic siren -- whether the camera sounds its own siren by itself. Separate from siren.<camera>_siren, which sounds it now.
switch.<camera>_auto_siren_on_motion	Fire the automatic siren on motion. Inert while Automatic siren is off.
switch.<camera>_auto_siren_on_person	Fire the automatic siren only on a person. Inert while Automatic siren is off.
switch.<camera>_camera_audio_in_ha_stream	Camera audio (in HA stream) - SDES cameras (battery models and the mains PTZ); toggles whether this camera's HA live stream includes audio, overriding the global option. Only affects HA's stream (not recordings/app); applies on the next view	Enabled
light.<camera>_floodlight	White floodlight/spotlight (models with one) - a light entity (config), off the switch domain	Enabled
siren.<camera>_siren	Siren - a siren entity (config), off the switch domain	Enabled
switch.<camera>_timestamp_overlay	Timestamp burned into the video (OSDEnable)	Enabled
switch.<camera>_hdr	HDR	Enabled
switch.<camera>_floodlight_automation	Light when someone appears -- the camera works its own floodlight on a detection. Renamed in 2.23.0; the entity ID is unchanged	Enabled
select.<camera>_light_stays_on_for	How long the floodlight stays on after it triggers: 20 / 30 / 40 / 50 seconds. Only on models that DECLARE the setting (the battery L2 line) - the M3 Pro line reports a value it then ignores. From 2.23.0, corrected in 2.23.1	Enabled
number.<camera>_light_brightness	Floodlight brightness 10-100. The floor is 10, not 0: zero is outside the camera's range, and off is the floodlight itself. On every camera that reports it, which was verified on the camera rather than assumed - from 2.23.0	Enabled
select.<camera>_light_behavior	Constant or Flash when the floodlight triggers. Only on models that DECLARE the setting (the battery L2 line) - from 2.24.0	Enabled
switch.<camera>_voice_prompts	Spoken prompts from the camera speaker	Enabled
switch.ptz_tracking	Auto-tracking toggle (PTZ models)	Enabled
number.motion_sensitivity	Motion sensitivity 1-5 (1 lowest)	Enabled
number.speaker_volume	Speaker volume 0-100	Enabled
select.night_vision	Auto / on / off	Enabled
switch.<camera>_sound_detection	Master sound detection (sound_enable) - from 2.19.8	Enabled
switch.<camera>_all_sound_detection	All-sound detection (all_sound) - from 2.19.8	Enabled
switch.<camera>_glass_break_detection	Glass-break detection - from 2.19.8	Enabled
switch.<camera>_smoke_alarm_detection_t3 / _t4	Smoke-alarm detection - from 2.19.8	Enabled
switch.<camera>_baby_cry_detection	Baby-cry detection - from 2.19.8	Enabled
sensor.<camera>_wifi_network	The Wi-Fi network the camera is joined to - from 2.19.8	Disabled
sensor.<camera>_sd_card_total / _sd_card_used	SD card capacity as the camera reports it, without a unit - from 2.19.8	Disabled
PTZ buttons	Stop plus only the directions the camera advertises - the A001064 advertises pan only, so it gets left / right / stop and no tilt or zoom buttons. See PTZ control	Disabled

The cameras listen for glass breaking, a smoke alarm, a baby crying and a dog barking. A switch is created for each detector the camera itself reports, so a model that lists something not named above still gets one, and a model that lists fewer gets fewer.

Three things worth knowing:

• A camera that has not answered reads as unknown, not off. Battery cameras are asleep between views and answer none of this, so they get no switches rather than a row of switched-off ones claiming a state they never reported. They are never woken to ask.
• These refresh slowly (about half-hourly once populated). They change when somebody edits a setting, so they are not worth a request every poll. After a restart they fill in over the first few minutes.
• The SD-card figures carry no unit on purpose. The camera reports bare numbers and does not say what they count. Labelling them bytes would render a confident number that could be wrong by a factor of a million. One camera here reports 29838 total and 28848 used on a 32 GB card, which looks like megabytes -- but "looks like" is not confirmation.

Removed in 2.15.0: switch.<camera>_ir_light. The camera acknowledged every write to it and kept its own value - confirmed by reading the value back on two M3 Pro units - so it was a control that did nothing and reported success. Night vision still drives the IR cut filter via select.<camera>_night_vision.

Entities marked Disabled are created but not enabled by default. Enable them from the device page if you need them (e.g. sensor.battery on a battery model, or the PTZ buttons on a PTZ camera).

• Lights - state is pushed over TCP and arrives almost instantly; there is no polling interval.
• Camera attributes (battery, SD card status, occupancy, motion-detection state, night-vision mode, IR state) - refreshed from the AiDot cloud every 5 minutes.
• Device list (to detect newly added / removed devices without a restart) - refreshed every 6 hours.
• Motion events - cloud-polled roughly every 30 seconds.