Verify the DSCP value of original packet header after GRE acl based tunnel encapsulation.

• Configure DUT with ingress and egress routed interfaces.
• Configure acl based tunnel configuration with action as encapsulation.
• Attach the filter on ingress interface.
• Configure the static route for the tunnel end point destination.
• Capture packet on ATE on the recieving end(port-2).
• verify dscp value of original packet after encapsulation.
• verify that no traffic drops in all flows.

• /acl/interfaces/interface/ingress-acl-sets/ingress-acl-set/config/set-name
• /acl/interfaces/interface/ingress-acl-sets/ingress-acl-set/config/set-type

• No packet drop should be oberserved.
• Capture the packet on recieving end and verify the orginal DSCP value. Orginal value should not be altered.