topology_test - bstoll/featureprofiles GitHub Wiki
Tests that ports an be successfully configured in a basic topology.
- Configure the ports on the DUT.
- Check that each port on the DUT has /config telemetry.
- Check that each port on the DUT has /state telemetry.
- Configure the ports on the ATE.
- Start control plane protocols on the ATE.
- Check that the link state on each DUT port is UP.
- Check that the link state on each ATE port is UP.
No configuration coverage.
- /interfaces/interface/config
- /interfaces/interface/state
- /interfaces/interface/state/oper-status
N/A
N/A