Validate basic telemetry paths required.

In the automated ondatra test, verify the presence of the telemetry paths of the following features:

• Ethernet interface

  • Check the telemetry port-speed exists with correct speed.
    • /interfaces/interfaces/interface/ethernet/state/port-speed
  • Check the telemetry mac-address with correct format.
    • /interfaces/interfaces/interface/ethernet/state/mac-address

• Interface status

  • Check admin-status and oper-status exist and correct.
    • /interfaces/interfaces/interface/state/admin-status
    • /interfaces/interfaces/interface/state/oper-status

• Interface physical channel

  • Check interface physical-channel exists.
    • /interfaces/interface/state/physical-channel

• Interface status change

  • Check admin-status and oper-status are correct after interface flapping.
    • /interfaces/interfaces/interface/state/admin-status
    • /interfaces/interfaces/interface/state/oper-status

• Interface hardware-port

  • Check hardware-port exists
    • /interfaces/interfaces/interface/state/hardware-port
  • Check that [hardware-port leaf] (https://github.com/openconfig/public/blob/0c9fb6b0ab96fdd96bb9e88365abe11e51a11e62/release/models/platform/openconfig-platform-port.yang#L306) exists as a component in the Device's component tree and has a type as PORT
    • For example, /components/component[name=]/state/type == oc.PlatformTypes_OPENCONFIG_HARDWARE_COMPONENT_CHASSIS_PORT
  • Use the parent leaf of the hardware-port component to traverse the component tree to verify an ancestor of type CHASSIS exists. Components in between the PORT and the CHASSIS may vary in quantity and type.

• Interface counters

  • Check the presence of the following interface counters.
    • /interfaces/interface/state/counters/in-octets
    • /interfaces/interface/state/counters/in-unicast-pkts
    • /interfaces/interface/state/counters/in-broadcast-pkts
    • /interfaces/interface/state/counters/in-multicast-pkts
    • /interfaces/interface/state/counters/in-discards
    • /interfaces/interface/state/counters/in-errors
    • /interfaces/interface/state/counters/in-fcs-errors
    • /interfaces/interface/state/counters/out-unicast-pkts
    • /interfaces/interface/state/counters/out-broadcast-pkts
    • /interfaces/interface/state/counters/out-multicast-pkts
    • /interfaces/interface/state/counters/out-octets
    • /interfaces/interface/state/counters/out-discards
    • /interfaces/interface/state/counters/out-errors

• Send the traffic over the DUT.

  • Check some counters are updated correctly.

• Component

  • Check the following component paths exists
    • /components/component/integrated-circuit/state/node-id
    • /components/component/state/parent

• CPU component state

  • Check the following component paths exists
    • (type=CPU) /components/component/state/description
    • (type=CPU) /components/component/state/mfg-name

• Controller card last-reboot-time and reason

  • Check the following component paths exists
    • (type=CONTROLLER_CARD) /components/component[name=]/state/last-reboot-time
    • (type=CONTROLLER_CARD) /components/component[name=]/state/last-reboot-reason

• Active Controller Card Software version

  • Check the following component path and value exists.
    • /system/state/software-version

• Controller Card Software versions

  • Check the following component path and value exists for component type OPERATING_SYSTEM that is present/installed, and whose parent component type is CONTROLLER_CARD.
    • /components/component/state/software-version

• LACP

  • Check the bundle interface member path and LACP counters and status.
    • /lacp/interfaces/interface/members/member

• AFT

  • Check the following AFT path exists.
    • TODO: /network-instances/network-instance/afts

• P4RT

  • Enable p4-runtime.
  • configure interface port ID with minimum and maximum uint32 values.
  • Check the following path exists with correct interface ID.
    • /interfaces/interfaces/state/id
  • configure FAP device ID with minimum and maximum uint64 values.
  • Check the following path exists with correct node ID.
    • /components/component/integrated-circuit/state/node-id

The below yaml defines the OC paths intended to be covered by this test. OC paths used for test setup are not listed here.

paths:
  ## Config Paths ##
  # None

  ## State Paths ##
  /interfaces/interface/state/admin-status:
  /lacp/interfaces/interface/members/member/state/interface:
  /lacp/interfaces/interface/members/member/state/counters/lacp-in-pkts:
  /lacp/interfaces/interface/members/member/state/counters/lacp-out-pkts:
  /lacp/interfaces/interface/members/member/state/aggregatable:
  /lacp/interfaces/interface/members/member/state/collecting:
  /lacp/interfaces/interface/members/member/state/distributing:
  /lacp/interfaces/interface/members/member/state/partner-id:
  /lacp/interfaces/interface/members/member/state/partner-key:
  /lacp/interfaces/interface/members/member/state/partner-port-num:
  /interfaces/interface/ethernet/state/mac-address:
  /interfaces/interface/state/hardware-port:
  /interfaces/interface/state/id:
  /interfaces/interface/state/oper-status:
  /interfaces/interface/ethernet/state/port-speed:
  /interfaces/interface/state/physical-channel:
  /components/component/integrated-circuit/state/node-id:
    platform_type: [ "INTEGRATED_CIRCUIT" ]
  /components/component/state/parent:
    platform_type: [
        "CONTROLLER_CARD",
        "LINECARD",
        "FABRIC",
        "POWER_SUPPLY",
        "INTEGRATED_CIRCUIT"
    ]
  /interfaces/interface/state/counters/in-octets:
  /interfaces/interface/state/counters/in-unicast-pkts:
  /interfaces/interface/state/counters/in-broadcast-pkts:
  /interfaces/interface/state/counters/in-multicast-pkts:
  /interfaces/interface/state/counters/in-discards:
  /interfaces/interface/state/counters/in-errors:
  /interfaces/interface/state/counters/in-fcs-errors:
  /interfaces/interface/state/counters/out-unicast-pkts:
  /interfaces/interface/state/counters/out-broadcast-pkts:
  /interfaces/interface/state/counters/out-multicast-pkts:
  /interfaces/interface/state/counters/out-octets:
  /interfaces/interface/state/counters/out-discards:
  /interfaces/interface/state/counters/out-errors:
  /qos/interfaces/interface/output/queues/queue/state/transmit-pkts:
  /qos/interfaces/interface/output/queues/queue/state/transmit-octets:
  /qos/interfaces/interface/output/queues/queue/state/dropped-pkts:
  /qos/interfaces/interface/output/queues/queue/state/dropped-octets:

rpcs:
  gnmi:
    gNMI.Subscribe:

N/A