static_route_test - bstoll/featureprofiles GitHub Wiki
Validate static route functionality in Management network-instance (VRF).
- Configure DUT with Management VRF and ATE1, ATE2 interfaces configured within this VRF
- Configure IPv4 and IPv6 default routes within Management VRF pointing to ATE2 interface
- Generate IPv4 and IPv6 traffic from ATE1 to any destination.
- Verify that traffic is received at ATE2 interface
The below yaml defines the OC paths intended to be covered by this test. OC paths used for test setup are not listed here.
TODO(OCPATH): Specify leaves for non-leaf paths that have been commented out.
paths:
## Config Paths ##
/network-instances/network-instance/config/name:
/network-instances/network-instance/config/description:
/network-instances/network-instance/config/type:
/network-instances/network-instance/interfaces/interface/config/id:
#/network-instances/network-instance/protocols/protocol/static-routes/static:
/network-instances/network-instance/protocols/protocol/static-routes/static/prefix:
#/network-instances/network-instance/protocols/protocol/static-routes/static/config:
/network-instances/network-instance/protocols/protocol/static-routes/static/config/prefix:
#/network-instances/network-instance/protocols/protocol/static-routes/static/next-hops/next-hop:
/network-instances/network-instance/protocols/protocol/static-routes/static/next-hops/next-hop/index:
#/network-instances/network-instance/protocols/protocol/static-routes/static/next-hops/next-hop/config:
/network-instances/network-instance/protocols/protocol/static-routes/static/next-hops/next-hop/config/index:
/network-instances/network-instance/protocols/protocol/static-routes/static/next-hops/next-hop/config/next-hop:
## State Paths ##
#/network-instances/network-instance/protocols/protocol/static-routes/static/state:
rpcs:
gnmi:
gNMI.Subscribe:
gNMI.Set: