route_summary_counters_test - bstoll/featureprofiles GitHub Wiki

RT-4.10: AFTs Route Summary

Summary

IPv4/IPv6 unicast AFTs route summary for ISIS and BGP protocol

Procedure

Configure DUT:port1 for an IS-IS session with ATE:port1

  • Validate total number of entries of AFT for IPv4 and IPv6

Establish eBGP sessions between ATE:port1 and DUT:port1 and another between ATE:port2 and DUT:port2

  • Configure Route-policy under BGP peer-group address-family
  • Advertise prefixes from ATE port-1, observe received prefixes at ATE port-2 for IPv4 and IPv6
  • Validate total number of entries of AFT for IPv4 and IPv6

OpenConfig Path and RPC Coverage

The below yaml defines the OC paths intended to be covered by this test. OC paths used for test setup are not listed here.

paths:
  ## Config Paths ##

  ## State Paths ##
  /network-instances/network-instance/afts/aft-summaries/ipv4-unicast/protocols/protocol/state/counters/aft-entries:
  /network-instances/network-instance/afts/aft-summaries/ipv6-unicast/protocols/protocol/state/counters/aft-entries:

rpcs:
  gnmi:
    gNMI.Subscribe:

Control Protocol Coverage

BGP IS-IS

Minimum DUT Platform Requirement

vRX

⚠️ **GitHub.com Fallback** ⚠️