lldp_packetout_test - bstoll/featureprofiles GitHub Wiki
Verify that LLDP packets can be sent by the controller.
- Connect ATE port-1 to DUT port-1, and ATE port-2 to DUT port-2.
- Disable on-box processing of LLDP.
- Enable the P4RT server on the device.
- Connect a P4RT client and configure the forwarding pipeline. Install the P4RT table entry required for LLDP.
- Send an LLDP packet from the client with egress_singleton_port set to one of the connected interfaces.
- Verify that the LLDP packet is received on the ATE port connected to the indicated interface.
No new configuration covered.
No new telemetry covered.
vRX if the vendor implementation supports FIB-ACK simulation, otherwise FFF.