interface_loopback_aggregate - bstoll/featureprofiles GitHub Wiki
Ensure Interface mode can be set to loopback mode and can be added as part of static LAG.
- Configure DUT port-1 to OTG port-1.
- Admin down OTG port-1.
- Verify DUT port-1 is down.
- On DUT port-1, set interface “loopback mode” to “FACILITY”.
- Add port-1 as part of Static LAG (lacp mode static(on)).
- Validate that port-1 operational status is “UP”.
- Validate on DUT that LAG interface status is “UP”.
- /interfaces/interface/config/loopback-mode
- /interfaces/interface/ethernet/config/port-speed
- /interfaces/interface/ethernet/config/duplex-mode
- /interfaces/interface/ethernet/config/aggregate-id
- /interfaces/interface/aggregation/config/lag-type
- /interfaces/interface/aggregation/config/min-links
- /interfaces/interface/state/loopback-mode
None
vRX