fib_failed_due_to_hw_res_exhaust_test - bstoll/featureprofiles GitHub Wiki
Validate gRIBI FIB_FAILED functionality.
-
Connect ATE port-1 to DUT port-1, and ATE port-2 to DUT port-2.
-
Establish a gRIBI connection (SINGLE_PRIMARY and PRESERVE mode) to the DUT.
-
Establish BGP session between ATE Port1 --- DUT Port1. Inject unique BGP routes to exhaust FIB on DUT.
-
Continuously injecting the following gRIB structure until FIB FAILED is received. Each DstIP and VIP should be unique and of /32. All the NHG and NH should be unique (of unique ID). DstIP/32 -> NHG -> NH {next-hop:} -> VIP/32 -> NHG -> NH {next-hop: AtePort2Ip}
-
Expect FIB_PROGRAMMED message until the first FIB_FAILED message received.
-
Validate that traffic for the FIB_FAILED route will not get forwarded.
-
Pick any route that received FIB_PROGRAMMED. Validate that traffic hitting the route should be forwarded to port2
- gRIBI
- Flush