Ensure that emergency CLI configuration can be pushed to device.

Note: this test is intended to cover only the case of pushing some configuration - since it is unknown what CLI configuration would be required in the emergency case that is covered by this requirement.

• Connect ATE port-1 to DUT port-1.

• TODO: Push base configuration to DUT specifying an interface configuration for DUT port-1.

• Push configuration using SetRequest specifying:

  • origin: "" (openconfig, default origin) - containing modelled configuration.

  • origin: "cli" - containing:

    interface <DUT port-1>
    shutdown
    

• Validate that DUT port-1 is shown as shutdown through telemetry.

• Validate that ATE port-1 reports that DUT port-1 is down.

• Run CLI command with GetRequest specifying origin: "cli":

  • show version and show lldp neighbors
  • Validate CLI response is generated by DUT.