BGP Keepalive and HoldTimer Configuration Test

• Establish eBGP sessions as follows between ATE and DUT

  • The DUT has eBGP peering with ATE port 1 and ATE port 2.
  • Enable an Accept-route all import-policy/export-policy under the neighbor AFI/SAFI.
  • The first pair is called the "source" pair, and the second the "destination" pair

• Validate BGP session state on DUT using telemetry.

• Modify BGP timer values on iBGP peers to 10/30 and on the eBGP peering to 5/15.

• Verify that the sessions are established after soft reset.

• /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/timers/config/keepalive-interval
• /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/timers/config/hold-time

• /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/timers/state/keepalive-interval
• /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/timers/state/hold-time

N/A

vRX