General

WinDarab enables you to analyse and display logged data recorded by BOSCH Motronic®

System Recommendations

• 1920 x 1080 resolution (4k supported)
• 16 Gb RAM
• Windows 10

Copyright / License Agreement

We thank you for choosing a Bosch Motorsport product. Please remember that it is the user’s responsibility to comply with all applicable copyright laws.

Bosch Engineering GmbH
Motorsport
Robert-Bosch-Allee 1
74232 Abstatt
Germany

All rights reserved.

No part of this program or this manual may--in any manner whatsoever-- be reproduced, modified, shared, translated into another language (including computer languages), or stored electronically without the prior written consent of Robert Bosch GmbH. Any unauthorized transmission of the program and/or manual will be prosecuted under criminal law. The License Agreement entitles you to work with this software. You may not, however, run this software concurrently on different computers.

Liability

In no event will Robert Bosch GmbH, or any person involved in the development, production, or distribution of this software be liable to you for any consequential, incidental, or indirect damages including damages for loss of business profits or diminished cost savings.

Glossary

Area	Refers to the horizontal division of an Oscilloscope in which channel signals are displayed.
Base Directory	A Base Directory represents a link to a particular folder on the hard drive (--> network). WinDarab saves data in sub-folders within a specified base directory.
Base Directory for Calculating Differences	Logged Data Directory that provides channel values (for the second channel) for calculating a difference.
Bit Area	See Area
CAN	Controller Area Network
CanCard	Most commonly used hardware for data recording. A more recent device is CardMemory.
Channels	Separate data signals within a recording.
Conditions	A condition is a linked set of mathematical criteria that must be met in a specific sample in order for that data sample to be included in an evaluation.
Configuration	A particular arrangement of channels, which can be loaded and displayed in an Oscilloscope.
Darab Explorer	Darab Explorer is used in WinDarab to manage Racetrack and Logged Data Files.
Data Logger	Data Logging Device for Measurement Channels
Differences	The Differences Channel is a special channel that calculates values for the difference resulting from a comparison of the same channel in two different Logged Data Files.
DLS	Data Logging System (consists of C55 Data Logger and MSI Devices)
ECU	Engine Control Unit
Grid	Grid lines which can be displayed in a Oscilloscope.
Logged Data File	A Logged Data File contains all data recorded in a vehicle.
Racetrack or Racecourse	A Racetrack or Racecourse is the location where vehicle data recording has taken place. WinDarab assumes that the selected racetrack corresponds to the racetrack where data was actually recorded.
Reader	See CanCard

Supported Devices

WinDarab supports the following devices from Bosch Motorsport.

DDUs

• DDU7
• DDU8
• DDU9
• DDU10

Data Logger

• C40
• C40 Plus
• C55
• C60
• C70
• C80

Controllers

• MS6.x
• MS7.x
• MS50.x