Starting and controlling SPADE - ashish-gehani/SPADE GitHub Wiki
To start the SPADE server, use the following command (in the SPADE/bin directory):
spade start
This will start the SPADE server as a daemon. To instead start SPADE as a foreground process, use the following:
spade debug
To start the controller used to configure the SPADE server, execute the following command (in the SPADE/bin directory):
spade control
The following will appear:
SPADE 3.0 Control Client
Available commands:
add reporter|storage <class name> <initialization arguments>
add analyzer|sketch <class name>
add filter|transformer <class name> position=<number> <initialization arguments>
remove reporter|analyzer|storage|sketch <class name>
remove filter|transformer <position number>
list reporters|storages|analyzers|filters|sketches|transformers|all
config load|save <filename>
exit
->
At the outset, no reporters, storage, filters, transformers, or sketches are present. This can be seen with the list command:
-> list reporters
No reporters added
-> list storages
No storage added
-> list filters
No filters added
-> list transformers
No transformers added
-> list sketches
No sketches added
To exit the controller without stopping the SPADE server, use the exit command:
-> exit
To stop the SPADE server, use the following command (in the SPADE/bin directory):
spade stop