Building miraclecast

1. Install Dependencies:

sudo apt install cmake libglib2.0-dev libudev-dev libsystemd-dev libreadline-dev check libtool autoconf

sudo apt install cmake libglib2.0-dev libudev-dev libsystemd-dev libreadline-dev check libtool

sudo dnf install cmake meson glib2-devel systemd-devel readline-devel check libtool

References:

You have a series of options to build miraclecast. Each one is feature complete so as you will:

$ mkdir build
$ cd build
$ ../autogen.sh g --prefix=/usr
$ make
$ sudo make install

See g option is for debug compilation Use c for optimized compilation

$ mkdir build
$ cd build
$ cmake -DCMAKE_INSTALL_PREFIX=/usr .. 
$ make
$ make install  # May require `sudo`: `sudo make install`

$ meson build --prefix=/usr --sysconfdir=/etc
$ cd build
$ ninja
$ ninja test
$ ninja install

Usually you need to install as privilege user. There's many ways to do that, normally sudo will work
```
$ sudo make install
$ sudo ninja install
```
In autotools autogen.sh accepts arguments to have specific configuration:
- c: compilation
- g: debugging
- a: pure/const warning
- l: clang build
- s: scan-build reporting
In cmake remember to remove CMakeCache.txt or cmake . will not regenerate Makefiles
Meson build use mesontest --wrap to run test with specific executable. Use that to pass test with valgrind
By default all will be installed in /usr/local. if you want to install in standard /usr path add --prefix=/usr to autogen.sh or meson build. For cmake use -DCMAKE_INSTALL_PREFIX=/usr
Install step may require root privileges. This is commonly solved using sudo
dbus policy is needed to expose dbus interfaces. This is read on '/etc' normally but you can modify it with: --sysconfdir on autotools and meson or -DSYSCONFDIR on cmake