Solar Board Parts List - alanbjohnston/CubeSatSim GitHub Wiki
Here is a parts check list for the solar board. Here is a complete Bill of Materials including ordering links.
- Solar Power Board PCB, vB3 is the latest Beta version
- 6x Adafruit INA219 DC current/voltage sensor board (Note 7 are needed if you put a solar panel on the bottom -Z)
- 5x Solar Cells, 4V,160mA 70mm x 70mm (Note 6 are needed if you put a solar panel on the bottom -Z)
- SMA M-F Cable, 6"
- SMA 90 Degree M-F adapter
- SMA Antenna 433MHz
- SC1464-ND 3.50mm Headphone Phone Jack Stereo (3 Conductor, TRS, with two switches) for RBF switch
- 490-SP-3530A 3.5mm Male plug
- Remove Before Flight keyring tag
- 5x Schottky Diodes 1N5817 (Note 6 are needed if you put a solar panel on the bottom -Z)
- DC-DC Boost Converter Module XL6009
- Momentary pushbutton switch SPST
- CP-5-ND Barrel PowerJack for DC charger 2.1mm x 5.5mm
- 2x 9V clip hard shell connector
- JST RCY cable pairs, 22AWG wire
- 250W Halogen Work Lamp
- 1x40 pin Male breakaway headers 2.54mm
- 8x 6 pin female header 2.5mm spacing (remove one pin from one to make it a 5 pin)
- 1x40 pin Male extra long breakaway header 2.54mm 19mm length
- 1x40 pin Single row 90 degree breakaway header 2.54mm
- 2x 4.7k Ohm resistors, 1/4 Watt
- 220 Ohm resistor, 1/4 Watt
- Green LED (clear lens for maximum brightness)
- Battery powered turntable
- Mounting square, foam
- 3D printed frame
If you need a detailed parts list with ordering links, email me ku2y at amsat dot org.
Back to Solar Power Board.