add glue hatches - ajtruckle/cut-tools-support GitHub Wiki
Add Glue Hatches
TS_ADDGLUEHATCHES
Add front / reverse hatch objects to selected polylines
Overview
This routine asks you to select some Glue Boundaries in the drawing and then it creates HATCH entities for each of the boundaries. A pop-up message is displayed at the end informing you how many HATCH entities were created for each layer.
Filtering Criteria
It uses the following filtering criteria when selecting the Glue Boundaries:
| Filter Type | Value |
|---|---|
| Entity Type | Closed LWPOLYLINE. |
| Layer | Glues_Front Glues_Reverse |
Hatch Properties
The HATCH entities that are created have the following properties:
| Setting | Description |
|---|---|
| Layer | The same layer as the LWPOLYLINE entity (colour BYLAYER). |
| Elevation | 0.0 |
| Pattern | Predefined pattern ANSI31. |
| Pattern Angle | This depends upon the layer of the HATCH entity. Glues_Front: 0.0. Glues_Reverse: 90.0 |
| Scale | 2.0 |
Each HATCH gets associated with the Glue Boundary.
| Previous Topic | Next Topic |
|---|