WiFi/AP settings

• set ssid and password
• wpa2/wpa3 security
• enable auto ai tuning for channels and stuff

device settings

• wifi 5ghz transmit power max
• band steering enabled

Switch settings

device settings

• device name
• static ip
• rstp priority increase

Other setup/settings to change

• system -> controller configuration -> Override Inform Host on and set Host for Inform to 192.168.1.69 (to prevent adoption drops after controller restarts when network is in bridge mode)
• disable auto controller app updates? (docker should take care of this)
• enable/setup auto firmware updates for devices
• set domain name to uber.lan wherever applicable

How To

adopt access point

• ssh into device and use command set-default to reset to defaults to be ready for adoption
• ssh into newly defaulted device and use set-inform http://192.168.1.69:8080/inform to notify controller to adopt this device

references

• https://help.ui.com/hc/en-us/articles/205143490-UniFi-How-to-Reset-Devices-to-Factory-Defaults#3
• https://help.ui.com/hc/en-us/articles/204909754-UniFi-Layer-3-Adoption-for-Remote-UniFi-Network-Applications