Washer Fluid Reservoir - aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware GitHub Wiki
Main Page >> Safety >> Windshield cleaning water tank
Change language
Last update 22-04-2024
Last update 22-04-2024
The washer fluid reservoir uses a magnetic sensor to detect the water level. This is a 2-wire sensor with only two signal states: ON or OFF. On means there's water in the tank, OFF means low level or no water. To remove and replace the sensor, one can use a plier.
Part Number: 31349235 sold on AliExpress The water tank pump has a 2-wire connector. See the pinout below for more info.
The washer fluid reservoir uses a 4-pin connector. 2 wires are used for the level sensor and 2 wires are used for the washer motor.
PIN | Function | Wire colors |
---|---|---|
1 | unused | |
2 | +12V DC washer motor | yellow w/ white stripe |
3 | common ground | black |
4 | +5V DC sensor signal | yellow |
PIN from top left to bottom right