Fuel Gauge LED retro illumination - aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware GitHub Wiki
Main Page >> Instruments Cluster >> Fuel Gauge LED retro Illumination
Last change 29-03-2024
status: M.V.P. NOW SELLING on Tindie.com
This is a PCB made to fit the fuel gauge in the instrument cluster to replace the traditional filament bulb with LED retro illumination. It is compatible with Volvo S60, S80, V70, XC70 and XC90 from 1998 to 2005.
Figure 1 - 3D rendering of the PCB add-on
Interactive view of the PCB Layout
Interactive view of the circuit schematic
Click to view the latest revision
The gauge dials are being sold as a kit, meaning, the buyer will have to do soldering and component assembly, and there's also the option of fully assembled and ready to be installed on the buyer's dashboard dials. Don't forget to view the LED add-on for the rear back doors.
Figure 2 - the PCB installed on the back of the Fuel Gauge
To order and buy, go to my store on Tindie.com.
For technical support during installation send me a message on WhatsApp +32 471 632 520.
Thank you ð.
Click above to Buy on Tindie.com
To buy the LEDs compatible with the factory hardware electronics I recommend the ones sold on AliExpress ( click here ). These LEDs are a direct fit and replacement of the original Volvo light bulbs. For detailed instructions on how to do the LED retrofitting and also technical assistance send me a message on WhatsApp +32 471 632 520. Thank you ð.
The full upgrade is completed with the installation of the front enclosure, one with a backlit LED built into it at the top. You will find one on newer models 2005 onwards and also on the R models 2004 onwards.
Figure 4 - An Instruments Cluster with RGB LED upgrade
ðĒ Fully tested and working
A green circle means the hardware electronics or the programming code was fully tested, each of its functionalities and capabilities. And it can be installed in a vehicle. Keep in mind this does not mean errors won't happen. As in everything related to electronics and software, there are revisions and updates. This open hardware is no different.
ðŊ Fully tested & working, no improvements necessary - already being sold online
ð Fully Open hardware \ source code
ðĪŠ There's better than this. don't use it
ð Fully closed hardware \ source code
âĄïļ fully tested and working, however, it is a dangerous solution to deploy
ðĄ Not tested. Working capability is unknown, it may work or not.
A yellow circle means the hardware electronics or the programming code was not fully tested, each of its functionalities and capabilities. This does not mean it not working, it simply means testing is needed before giving a green circle of approval.
ðī Fully tested but not working.
A red circle means the hardware electronics or the programming code was fully tested, and found some kind of critical error or fault. This means the electronics or firmware code cannot be used in a vehicle.
â Not started.
The hourglass means the hardware electronics or the programming hasn't started. Most likely because is waiting for the necessary test components needed for reverse engineering and also engineering of the new open solution.
ð New updated contents
The new icon means the link next to it was recently updated with new contents
ðŽ Comments on the Discussion page
The comments icon means there are useful and even new comments on the discussions page of the repository important for what you are seeing or reading.
Join the beta program to test and debug to provide feedback, ideas, modifications, suggestions, and improvements. And in return, write your own article blog, or post on social media about it. See participation conditions on the Wiki.
The Beta Participant Agreement is a legal document being executed between you and AeonLabs that outlines the conditions when participating in the Beta Program.
Bug reports and pull requests are welcome on any of AeonLabs repositories. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the code of conduct.
- Contributing
Please make sure tests pass before committing, and add new tests for new additions.
You can get in touch with me on my LinkedIn Profile:
You can also follow my GitHub Profile to stay updated about my latest projects:
The PCB design Files I provide here for anyone to use are free. If you like this Smart Device or use it, please consider buying me a cup of coffee, a slice of pizza or a book to help me study, eat and think new PCB design files.
Make a donation on PayPal and get a TAX refund*.
Did you like any of my PCB KiCad Designs? Help and Support my open work to all by becoming a GitHub sponsor.
Before proceeding to download any of AeonLabs software solutions for open-source development and/or PCB hardware electronics development make sure you are choosing the right license for your project. See AeonLabs Solutions for Open Hardware & Source Development for more information.