Brake Master Cylinder Reservoir - aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware GitHub Wiki
Main Page >> Engine Bay Sensors >> Brake Master Cylinder Reservoir
Change language
Last update 22-04-2024
Last update 22-04-2024
The Brake Master Cylinder Reservoir uses a magnetic sensor to detect the brake fluid level. This is a 2-wire sensor with only two signal states: ON or OFF. On means there's brake fluid in the reservoir, OFF means low level or no brake fluid. It is not possible to replace the sensor alone, one needs to buy the reservoir.
The coolant tank uses a 2-pin connector
PIN | Function | Wire colors |
---|---|---|
1 | Ground | Black |
2 | +5V signal data | Yellow w/ red stripe |
PIN from top left to bottom right