Usage Instructions - aefermiano/psxton64adapter GitHub Wiki
Steps
- Plug the controller in the adaptor, and the adaptor in the console.
- Once you turn on the console, the indicator LED in the adaptor will turn on as well.
- Controller will start in digital mode - adaptor will ignore the buttons. Manually turn on the analog mode in order to make the buttons work.
Default button mapping
If you haven't customized the button mapping (see Building the Adaptor), this is the default one:
| Nintendo 64 | Playstation |
|---|---|
| Analog Stick | Left Analog Stick |
| C Buttons | Right Analog Stick |
| A | X |
| B | Square |
| R | R1 |
| Z | L1 |
| L | L2 |
| Start | Start |
Custom presets
If you have added new button mappings (you can have up to 3, check Building the Adaptor), you can circle among them as follows:
- Turn off the analog mode
- Press X to advance to the next available preset. The LED will indicate which profile you are in - it will blink once for preset 1, twice for preset 2, etc.
- Turn the analog mode back on in order to exit configuration mode.