Support filament - admittansen/stratasys_hack GitHub Wiki

The support filament cartridges used in the Stratasys Dimension Elite are labeled "P400-SR", or "SR-10", and are water soluble. They call the filament type SST, Soluble Support Technology.

The default temperature seems to be 265 degrees celcius, but rise with 30 degrees to 295 when printing the first layer. 1

With the help of a program called MaracaEX the printing temperature might be altered within a certain range. 3

HiPS material might be usable without changing the printing temperature.

For the chemist there might be some information to find in the safety data sheet. 2

---

1 https://www.3dprintforums.com/forum/stratasys/crazy-temperature-behavior-dimension-768-sst-3035/

2 https://www.stratasys.com/~/media/Main/Files/SDS/SR_10_P400SR_Soluble_Support/400645_0002_REV_A_EN.ashx

3 https://www.3dprintforums.com/forum/stratasys/soluble-support-conversion-p400-sr-pva-water-soluble-3721/