Embedded Scaffolds - activescaffold/active_scaffold GitHub Wiki

Embedding scaffolds allow you to reuse your scaffold and insert it into other views as a widget. You can specify constraints for your scaffold to limit the records it works with.

To embed a scaffold in another controller, or on a page somewhere, use render :active_scaffold => "controller_id" (it’s a special call that will turn around and call render_component). You may pass ANY combination of parameters you would like: label, sort, sort_direction, search, and even constraints (covered later).

# Render UsersController.
render :active_scaffold => "users"

# The same, but this time change the heading to "Active Users".
render :active_scaffold => "users", :label => "Active Users"

# Sorting by `name`, ascending. Both :sort and :sort_direction are compulsory.
render :active_scaffold => "users", :params => {:sort => "name", :sort_direction => "ASC"}

Constraints are simple field/value pairs used as search conditions for the scaffold’s list. Because constrained columns become rather boring to look at, they are automatically removed from column sets so they don’t appear in List, Create, Update, etc. Furthermore, records created through a constrained embedded scaffold will automatically receive the values it is constrained to (a user can not create a record with a value outside of the constraint). Constraints may be the name of a database field (e.g. user_id) or the name of a attribute or association column. If the constraint is the name of an association, then the constraint value will be assumed an ID.

#render all entries for a user
render :active_scaffold => 'entries', :constraints => { :user_id => @user.id }

#render all active users
render :active_scaffold => 'users', :constraints => { :status => "active" }

Important: Constraints are stored in the session. You should therefore only use simple
values, e.g. @record.id instead of @record.

render :active_scaffold => 'users', :constraints => {:active => 1, :user_group => 15},
       :params => {:hello => 'world'}, :label => 'Active Editors'

Here’s the constraint for a HABTM association.

render :active_scaffold => 'users', :constraints => {:editors => @record.id},
       :label => 'Related Editors'

To access constraint data inside of your controller, use active_scaffold_session_storage[:constraints][:constraint_key].

class Admin::RentalCompsController < ApplicationController
  layout 'default_scaffold'
  before_filter :load_listing

  active_scaffold :rental_comps do |config|
  end

  def load_listing  
    begin
      @listing = Listing.find(active_scaffold_session_storage[:constraints][:listing_id])
    rescue
      @listing = Listing.new
    end
  end

  def before_create_save(record)
    record.listing_id = @listing.id if @listing.id
  end
end

At the time of writing, active_scaffold_session is only accessible by the controller, and not by the view.

Constraints are powerful, but only because they’re limited to equality-based conditions, i.e. a equals b. If you want something simpler and more flexible, add :conditions to your embedded scaffold. Unlike constraints, these conditions will affect what is in the list, but will not affect visible columns and will not automatically apply to all new records. But in exchange you can create greater-than, less-than, in-set, etc., conditions.

#note: example hasn't been tested for typos or other obvious problems
render :active_scaffold => 'users', :conditions => ['created_at > ?', Time.now - 5.days],
       :label => 'New Users'

The following example comes from a real estate site that lists houses (a listing). One page embeds two interfaces on a listing page to add the ability to modify/update comparable properties (right there on the same page).

# Here's everything you need to know about the models/controllers involved

# app/models/comp.rb
class Comp < ActiveRecord::Base
  belongs_to :listing
end

# app/models/rental_comp.rb
class RentalComp < ActiveRecord::Base
  belongs_to :listing
end

# app/models/listing.rb
class Listing < ActiveRecord::Base
  has_many :comps
  has_many :rental_comps
end

# app/controllers/admin/comps_controller.rb
class Admin::CompsController < ApplicationController
  layout 'default_scaffold'

  active_scaffold :comp do |config|
    config.columns = [ :listing, :mls, :price, :sqft, :year_built, :basement,
                       :basement_percent, :beds, :baths, :layout, :zip, :status, :rank ]
    columns[:basement].label = "B"
    columns[:year_built].label ="Year"
    columns[:basement_percent].label = "FIN"
    columns[:mls].label = "MLS #"
    columns[:layout].label = "Style"
  end
end

# app/controllers/admin/rental_comps_controller.rb
class Admin::RentalCompsController < ApplicationController
  layout 'default_scaffold'

  active_scaffold :rental_comps do |config|
    config.columns = [ :listing, :monthly_rent_price, :sqft, :zip ]
  end
end

app/views/listings/_edit_comps.rhtml

<!-- render both scaffolds for the current listing (@listing): -->
<h1>Comps</h1>
<div>
  <%= render  :active_scaffold => "admin/comps",
              :constraints => { :listing_id => @listing.id } %>

  <%= render  :active_scaffold => "admin/rental_comps",
              :constraints => { :listing_id => @listing.id } %>
</div>

You can put the same scaffold more than once on a page, but the constraints or conditions must be different so DOM IDs for the two scaffolds are different.

Do it like this:

<div>
  <%= render  :active_scaffold => "admin/comps",
              :constraints => { :status => "active", :listing_id => @listing.id },
              :label => "Active Comps" %>

  <%= render  :active_scaffold => "admin/comps",
              :constraints => { :status => "sold", :listing_id => @listing.id },
              :label => "Sold Comps" %>
</div>

Embedding scaffolds is a great way to re-use interfaces! Be creative, have fun!

Polymorphic relationships require a type field. You should take advantage of this in your embedded scaffolds for these polymorphic relationships by adding the _type field to the constraints of the scaffold.

Example:

Models would look like this:

class Notes < ActiveRecord::Base
  belongs_to :notable, :polymorphic => true
end
class Order < ActiveRecord::Base
  has_many :notes, :as => :notable
end

The Notes table in your database would contain among others, the two following fields:

• notable_id
• notable_type

The embeded scaffold in the view:

<%= render :active_scaffold => 'order_notes', :constraints => { :notable_id => @record.id, :notable_type => "Order"},
           :label => as_('order_notes_controller_label') %>

Rails 3.1 can use render_component for embedded scaffolds, but it’s not needed and it’s untested. You can install vhochstein’s gem:

gem install render_component_vho