Cars – Physics scripts - ac-custom-shaders-patch/acc-extension-config GitHub Wiki

With 0.1.77 update it is now possible to use a Lua script to extend car physics. Simply create a “script.lua” in car data folder and it’ll work if extended physics is enabled. And if data is unpacked, it would reload live if script has been edited.

Available functions

• Basic:
  • Access current car state;
  • Access frequently updating detailed car physics state;
  • Modify car state:
    • Gear grinding flag;
    • Car damage;
    • Engine damage;
    • Gearbox damage;
    • Engine RPM;
    • If stalling is enabled or not;
    • Tyres inflation (set to 0 to blow them up);
  • Modify user controls;
  • Use up to 8 values accessible by dynamic physics controllers and car instrument inputs (for example, a complex logic can be tied to a differential this way);
  • Add extra forces to car body.
• Added in 0.1.78:
  • Move car box colliders;
  • Set aero wings gain.

More functions will be added soon.

A few short examples

• Use Extra A switch to toggle between engine power LUTs:

  local carPh = ac.accessCarPhysics()
  local powerBase = ac.DataLUT11.carData(car.index, 'power.lut')
  local powerAlt = ac.DataLUT11.carData(car.index, 'power_alt.lut')
  
  function script.update(dt)
    local activeLUT = car.extraA and powerAlt or powerBase
    ac.overrideEngineTorque(activeLUT:get(carPh.rpm))
  end
  

• Exploding engine if engine water temperature exceeds 95 degrees:

  function script.update(dt)
    if car.waterTemperature > 95 then
      ac.accessCarPhysics().engineLifeLeft = 0
    end
  end
  

• Rearranging gears in a car with H-shifter so that first gear becomes reverse, for a dog-leg gearbox:

  function script.update(dt)
    local data = ac.accessCarPhysics()
    if data.requestedGearIndex == 2 then
      -- If first gear is requested, change to reverse
      data.requestedGearIndex = 0
    elseif data.requestedGearIndex > 2 then
      -- If above frist gear is requested, bump it one down
      data.requestedGearIndex = data.requestedGearIndex - 1
    else
      -- Otherwise, set it to neutral
      data.requestedGearIndex = 1
    end
  end
  

• Kill engine for a second if g-forces get too extreme for more than a second:

  local counter = 0
  local stalledFor = 0
  
  function script.update(dt)
    local data = ac.accessCarPhysics()
    if math.abs(data.gForces.x) > 2 then
      counter = counter + dt
    else
      counter = 0
    end
  
    if counter > 2 then
      -- If g-force was above threshold for more than two seconds, activate stall for a second
      stalledFor = 1
    end
  
    if stalledFor > 0 then
      -- If stalled, lock gas pedal at 0
      stalledFor = stalledFor - dt
      data.gas = 0
    end
  end
  

• Jet engine activating with Extra A switch when car drives above 40 km/h (regular car script can add audio and particle effects, also [EXTRA_SWITCHES] SWITCH_A_FLAGS = HOLD_MODE in car config might help):

  function script.update(dt)
    local data = ac.accessCarPhysics()
    local jetActive = car.extraA and car.speedKmh > 40
    data.controllerInputs[0] = jetActive and 1 or 0
    if jetActive then
      ac.addForce(vec3(0, 0, -2), true, vec3(0, 0, 5000), true)
    end
  end
  

Lua introduction

Here is an introduction in Lua scripting. Some more examples can be found here.