Zac Samborsky - abner722/BUM-Fitness-Pal GitHub Wiki

###Contributions:

My chip contribution of the project was the heart rate sensor. The sensor itself when programmed with the arduino can read someone's pulse. The code used for this sensor was found on another github site with all of the required files to learn how to use the sensor, except for the display on the lcd module. Once I learned how to work the sensor, I was able to show my group and explain how and what made it work, with possible code of displaying. After that I passed the sensor off to Dalton and Zak for them to interface it into the fitness pal and i was on the troubleshooting side for it.

My other contribution was the circuit diagram. The only parts that could not be found on fritzing was the pulse sensor, the muscle sensor and the Rn-52 bluetooth module. I did indicate with the muscle sensor and the pulse sensor that the chips used were just shown as examples. My other contributions include helping write up the report for the github site involving my sensor code, references, and adding what my part does.

Links, to what I worked on are down below, and they lead to other parts of the repository.

https://github.com/abner722/BUM-Fitness-Pal/wiki/Library#heartbeat-sensor-source-code

https://github.com/abner722/BUM-Fitness-Pal/wiki/Wiring-Diagram#wiring-diagram