How to tune 2Boost version 2 - aalesv/2boost GitHub Wiki

Install definitions

Install 2Boost RomRaider definitions:

• Copy RR_2BOOST.xml from xml\ folder of 2Boost sources to folder with your RomRaider definitions

• Open RomRaider definition manager, add RR_2BOOST.xml to your definitions list and place it the topmost

Tune

Open 2Boost patched ROM with RomRaider. If it prompts for checksum correction, agree.

All tables specific to 2Boost mod are located in groups which names start with 2Boost.

Global settings

2Boost settings group contains global 2Boost settings.

Map Switch Input table controls how one switch maps.

ROM without Si-Drive support

When Disabled selected, 2Boost maps not used. When Cruise On/Off selected, 2Boost map 1 used when cruise is off, map 2 used when cruise is on if the corresponding hack is enabled.

ROM with Si-Drive support

When Disabled selected, 2Boost maps not used. When Cruise On/Off selected, 2Boost SI-Drive Intelligent map used when cruise is off, SI-Drive Sport map used when cruise is on if the corresponding hack is enabled. When SI-Drive Switch selected, 2Boost map used according to selected SI-Drive mode - Intelligent, Sport or Sport Sharp if the corresponding hack is enabled.

Boost control

2Boost - Boost Control - Target group contains boost control settings and tables.

Boost Target Hack table is responsible for enabling / disabling 2Boost Boost Target hack.

Target Boost map tables control boost in different modes as described above. Tune them same way as you tune Target Boost table.

Wastegate contol

2Boost - Boost Control - Wastegate group contains wastegate control settings and tables.

Wastegate Hack table is responsible for enabling / disabling 2Boost Wastegate hack.

Initial Wastegate Duty tables control initial wastegate duty cycle in different modes as described above. Tune them same way as you tune Initial Wastegate Duty table.

Max Wastegate Duty tables control maximum wastegate duty cycle in different modes as described above. Tune them same way as you tune Max Wastegate Duty table.

Open loop fueling control

2Boost - Fueling - Primary Open Loop group contains open loop control settings and tables.

Fueling Hack table is responsible for enabling / disabling 2Boost fueling hack.

Primary Open Loop Fueling tables control open loop fueling in different modes as described above. Tune them same way as you tune Primary Open Loop Fueling tables.

Ignition timing control

2Boost - Ignition Timing - Advance group contains ignition timing settings and tables.

Timing Hack table is responsible for enabling / disabling 2Boost timing hack.

Base Timing tables control ignition timing in different modes as described above. Tune them same way as you tune Base Timing tables.

Variable Valve Timing (AVCS) control

2Boost - Variable Valve Timing (AVCS) group contains AVCS settings and tables.

Intake AVCS Hack table is responsible for enabling / disabling 2Boost intake AVCS hack.

Intake Cam Advance Angle tables control intake AVCS in different modes as described above. Tune them same way as you tune Intake Cam Advance Angle tables.

Exhaust AVCS Hack table is responsible for enabling / disabling 2Boost exhaust AVCS hack.

Exhaust Cam Retard Angle tables control exhaust AVCS in different modes as described above. Tune them same way as you tune Exhaust Cam Retard Angle tables.

Throttle control

2Boost - Drive-by-Wire Throttle (DBW) group contains throttle plate settings and tables.

Target Throttle Plate Position Hack table is responsible for enabling / disabling 2Boost throttle hack.

Target Throttle Plate Position tables control target throttle plate posiotion in different modes as described above. Tune them same way as you tune Target Throttle Plate Position tables.