Analog and Digital Trigger Values - ZadenRB/OpenGCC_Firmware GitHub Wiki

Overview

Each trigger on a GameCube controller actually consists of two inputs, an analog value from 0-255 measuring how far the trigger is depressed, and a digital value when the trigger is fully depressed. Since the GameCube was the last Nintendo console with analog trigger values, newer titles do not use the full range of the analog trigger. For instance, Super Smash Bros. Ultimate simply has a threshold (79) at which the trigger is considered "pressed", but does not actually use the digital input, instead treating the analog input as a digital on/off at that threshold. By contrast, in Super Smash Bros. Melee the analog range is used to control the strength of your analog shield (capped at 140), while the digital input is used for the digital shield.

Trigger modifications

Aside from a variety of modifications designed to enhance the feel of triggers (different springs, stabilization, and the use of keyboard switches for the digital press), there are some common modifications to the functionality of triggers. One is the removal of the analog or digital capability of a trigger to only allow one type of input from the trigger. Another is trigger plugs, which are used to shorten the analog range of a trigger and allow a quicker digital press. Long trigger plugs can effectively eliminate the analog range from a trigger, by causing it to immediately bottom out. OpenGCC Firmware can perform software emulation of these modifications, as described in the user guide.