White List - XDagger/xdag GitHub Wiki

White-list for all pools accept by the community.

1 IP Owner Purpose Frontend/stats Pool CFG
2 37.187.27.30:13655 Edward Explorer http://xdagscan.com/
3 195.201.168.17:16775 Kbs1 Explorer https://explorer.xdag.io/
4 136.243.57.79:13655 Edward Pool http://136.243.57.79/stats.txt
5 136.243.55.153:16775 Kbs1 Explorer http://explorer.xdag.io
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40

POOL OWNERS' AGREEMENT

Due to the recent events the following recommendations and decisions have been made by the community and developer team.

Only use pools listed in the whitelist. Even though it’s very restraining in its current state, using only approved pools is vital for the health of the network. For now, every submission regarding whitelist addition will be audited, and only one pool will be added to whitelist per week. This will continue until the network is fully stable. The following requirements have to be fulfilled in order to apply for a pool:

  1. No private pools
  2. A public frontend would be appreciated. If you don’t want to add one, please provide at least:
    1. Pool state must be exposed in real time (maximum interval time: one minute) by HTTP.
    2. Pool stats must be exposed in real time (maximum interval time: one minute) by HTTP.
    3. Pool net conn must be exposed in real time (maximum interval time: one minute) by HTTP.
  3. Server time zone must be set to UTC time zone.
  4. Must use ntpdate to synchronize time.
  5. Must use root or unlimited user (max open files limit set to more then 4096) to start pool process.
  6. Do not try to change the hardcode of max miners.
  7. Server configuration with 8-core CPU, 32G RAM, SSD raid0/raid10 and above.
  8. 1Gbit/s Internet Speed and above.
  9. Do not block other pools to synchronize.
  10. The contact person of a pool must be added to the Discord poolowner group.

Regarding whitelist additions, please send your requests to: [email protected]. No other ways will be accepted for now.

In your email request, please include this list and fill out everything.

  1. Pool node IP and port:
  2. Pool configuration:
    1. Pool config:
    2. NTP config:
    3. Timezone config:
  3. Pool hardware configuration:
    1. CPU:
    2. RAM:
    3. Disk:
    4. Internet bandwidth:
  4. Pool frontend:
    1. state through HTTP:
    2. stats through HTTP:
    3. net conn through HTTP:
    4. Pool frontend link (optional):
  5. Pool owner: (Discord username is better for communication.)

You will receive an invitation to join Discord from [email protected].

Example of a properly filled out request (XDAG v0.2.3):

  1. Pool node IP and port: 52.69.99.30:13655
  2. Pool configuration:
    1. Pool config: 52.69.99.30:13654:8192:1024:1024:1:10:5:1
    2. NTP config: sudo ntpd -s pool.ntp.org
    3. Timezone config:
      $timedatectl
      Local time: Tue 2018-06-05 18:00:05 UTC
      Universal time: Tue 2018-06-05 18:00:05 UTC
      RTC time: Sun 2018-05-27 14:02:59
      Time zone: Etc/UTC (UTC, +0000)
      Network time on: yes
      NTP synchronized: yes
      RTC in local TZ: no
  3. Pool hardware configuration:
    1. CPU: Intel(R) Xeon(R) Platinum 8175M CPU @ 2.50GHz 16 Cores
    2. RAM: 64GB
    3. Disk: 100GB + 300GB + 100GB SSD
    4. Internet bandwidth: 10Gbps
  4. Pool frontend:
    1. state through HTTP: http://pool.xdag.us/state.txt
    2. stats through HTTP: http://pool.xdag.us/stats.txt
    3. net conn through HTTP: http://pool.xdag.us/netconn.txt
    4. Pool frontend link (optional): http://pool.xdag.us/index.html
  5. Pool owner: Frozen (Discord: frozen#0085)

Tips:

  • Please use UTC time and sync time on pool server with the nearest source from http://www.pool.ntp.org/
    ntpupdate -s servername

  • Please use cat /proc/cpuinfo to get CPU info.

  • Please use cat /proc/meminfo to get RAM info.

  • Please modify /etc/security/limits.conf to set open file limit.
    Example:
    * soft nofile 65536
    * hard nofile 65536

  • Please use ulimit -a to get max open file info.

  • Please use timedatectl get to timezone info.

  • state is xdag command, export this information at least once per minute.
    echo -e "state\nexit\n" | ./xdag -i > state.txt

  • stats is xdag command, export this information at least once per minute.
    echo -e "stats\nexit\n" | ./xdag -i > stats.txt

  • net conn is xdag command, export this information at least once per minute.
    echo -e "net conn\nexit\n" | ./xdag -i > netconn.txt

  • The public HTTP access links should be like below and updated at least once per minute:
    http://pool.xdag.us/state.txt
    http://pool.xdag.us/stats.txt
    http://pool.xdag.us/netconn.txt

  • Please set your firewall or iptable correctly for other pools to connect.

Maintainer: Frozen