Stability Test - Wildlander-mod/Support GitHub Wiki
Wildlander Stability Test
As the great quote goes: “Better be Safe than 15 hours in-sorry” 😝
This guide has been created for new users in mind that want to stress test the stability of their game after downloading base Wildlander.
Steps For Initial Stress Test
-
Start a New Game Skip through all the options.
-
Open MCM Menu (press Escape, Scroll down to mod configuration)
-
Find “Sunhelm” and Disable
-
Find “Frostfall” and Disable
-
Open Console by pressing '~' “Tilde” Key is below ESC*
-
type: tgm (Enter) * This Enables "The God Mode"
-
player.setav speedmult 1200 (Enter) This adjusts your characters speed
-
set timescale to 1000 (Enter) This adjusts your worlds timescale
-
coc whiterun (Enter) This teleports you to Whiterun
-
Your goal now is to run from Whiterun to Solitude Docks
- You will get some stutter, maybe even a lot - that is fine. You just don't want to CTD. - Stay on the road the best you can while also trying to complete this as fast as you can - This may make you motion-sick - but this is Unavoidable as we are trying to force skyrim to load as much as possible as fast as possible.
-
Run to Solitude Docks
-
Once at the end of the docks (There is a boat on your right ), spin and generally move around erratically
-
If you do not experience any crashes during this process, your installation should be fine and you have a stable game - Make sure to Exit and Restart Skyrim COMPLETELY before creating your first character to prevent script contaimination from the stability test.
I Crashed Jumping and Spinning at The Solitude Docks, Now What?
If you make it to Solitude Docks but crashed while there/spinning
Test again with a lower ENB shader
I Crashed On The Way To Solitude!
Your Wildlander graphics settings are too high!
Test again with a lower Graphics preset
Congratulations! You’ve finished the Stress Test!! 🎉🎉🎉🎉