Lesson 1 mac user - Water-Monitor/IoT-Portfolio-FJS GitHub Wiki

Lab IoT Hello World

Ulno told me that's it's ok to install and did not have to install any drivers which seemed like a good sign as a mac user. This is good to know for the mac users that run through this problem, my recommendation is to read the "readme" pdf file that comes with care and follow the instructions from the manual. I now did something that did not need to be done, as I am usually in a hurry to get things done relatively quickly, but this is something I learned from for the future. I began installing the Arduino ide and for me, it took a bit of time because of my mac. It worked in the end after I had to restart my mac for the installment. I don't think the restart was necessary for this, and only needed to install Arduino ide, which is what I did after the restart and it worked well and was on track with the group. Inuo explained the structure of the demos di & mini and teach us the meaning of the 5v on the microcontroller, which was meant for the USB connection that required 5volts.

Uilno then explained the code that was pre-installed on the Arduino, the code was specified for the device to make its LED light flash and he went through how we could control the device through the server on the computer and we did it using wifi Explaining the structure of demos di & mini controller Going through the setup to light up the led We had to use the hotspot and not the wifi in the university eduroam, because the devices are not powerful enough for that network, one solution is to use different

When we got the chance to start experimenting with the device, I managed to make it flash with the help of his review. The second experiment was to control the device via wifi and a server through the computer I also managed without any contours.