Audio condition - WarmUpTill/SceneSwitcher GitHub Wiki

The "Audio" macro condition allows you to check the volume of an audio source.

This includes both how "loud" or "quiet" an audio source is on your stream or recording and which volume level you have configured for an audio source.

The audio source to check can be selected at (1) and the type of check to be used at (2).

Output volume

This type of check will allow you to check how "loud" an audio source is.
You can select whether the output volume needs to be above or below a configured threshold at (1).
The volume threshold itself can be configured at (2).

Note that the volume of the selected audio source is checked after all filters are applied.

Configured volume level

This type of check will allow you to perform actions based on the configured volume level - meaning the position of the volume slider of an audio source and not the actual volume output.

The type of condition check can be selected at (1).

Supported check types are:

• Whether an audio source's configured volume level is above, below, or exactly at a specific value
• Whether an audio source is muted or unmuted