Samsung Galaxy Tab S6 - TrebleDroid/treble_experimentations GitHub Wiki
đą Samsung Galaxy Tab S6 - gts6l
Tested device: Samsung Galaxy Tab S6 SM-T865 - gts6l
- Architecture: ARM64
- VNDK Support: VNDK Lite
- System Type: System-as-root
đ Steps to install
Note: Use it at your own risk! I nearly bricked it, so be careful!
-
Firmware: Be sure to have at the latest firmware installed on the device. If not, flash the latest firmware using Odin.
-
Unlock Bootloader: Enable Developer Options & OEM Unlocking in Settings. Turn off the device, then hold Volume Up + Volume Down while being connecting to a PC to enter Download Mode and select the unlock option.
-
Flash TWRP & vbmeta: Boot into Download Mode and open Odin. Add the latest TWRP image in the AP slot and vbmeta.tar in the CP slot, then flash.
-
Install LineageOS: Boot directly into TWRP, wipe Dalvik Cache and Cache in the Advanced menu, then format Data. Transfer the system.img to a USB flash drive or an SD card, then go to the Install menu, select the image, and wait for the installation to complete. After that, reboot to finish the installation.
âī¸ Hardware support
| Component | Status | Comment |
|---|---|---|
| Camera | â | Working |
| Speaker / Mic | â ī¸ | Bottom speakers working, top speakers doesn't |
| SIM / Mobile Data / Voice | â | Reported working, untested |
| VoLTE | â | Reported working, untested |
| Wi-Fi | â | Working |
| Bluetooth | â | Working |
| Hardware Buttons | â | Working |
| S-Pen | â ī¸ | Working, Side button cannot be used |
| Fingerprint | â | Reported working |
| Offline Charging | â | Working |
Tested By: roffiervalj - SM-T865 OXM, T865XXU6DXE2 @ 25-01-2025
âšī¸ Additional Notes
- When flashing new firmware, you will need to enable Developer Options and Wi-Fi to successfully flash TWRP, otherwise Odin will throw an error!
- I used an Unofficial LineageOS 15.1 GSI for testing.
- Better tutorials can be found on XDA Forums
Template created by @zguithues and @hackintosh5