Klipper-for-TwoTrees-Sapphire-Plus-SP5

Klipper printer-twotrees-sapphire-plus-sp-5-v1-2020.cfg

https://github.com/Klipper3d/klipper/blob/master/config/printer-twotrees-sapphire-plus-sp-5-v1-2020.cfg

Generic

https://github.com/Klipper3d/klipper/blob/master/config/generic-mks-robin-nano-v1.cfg

Installing Klipper on Sapphire Plus (SP-5)

https://travis90x.altervista.org/compile-klipper-for-mcu/

A simple print recovery system for Klipper

https://github.com/pappicio/plr-klipper

Klipper Splash Screen Creator

https://github.com/pappicio/klipper-splash-creator/tree/main/WindowsApp1

Klipper issues

No connection with Moonraker after updates

If you update Kliper and Moonraker with Kiauh in the folder printer_data/systemd Check klipper.env

For some reason you can end up with serial connection. This needs to be changed back to UDS.

KLIPPER_ARGS="/home/pi/klipper/klippy/klippy.py /home/pi/printer_data/config/printer.cfg -l /home/pi/printer_data/logs/klippy.log -a /tmp/klippy_uds"