Building the module - TomWhitwell/TuringMixExpander GitHub Wiki
##Populate the PCB
- This is a straightforward build
- Add the vactrols LAST, after the resistor networks.
- Detailed step by step Thonk build document is here.
Rev 3 OSH Park Build Notes
- PCB has no values on silkscreen
- Test build with 1.5K led resistors
- Smaller resistor footprint is much neater
- Top 2 channels = log, bottom two = linear
- Jumper is inverted - STRIP AT TOP
##Lasercut Panels
I used a black lasercut panel for my build.
The artwork is in this repository:
Artwork PDF
Artwork Illustrator File
The illustrator file is in layers, you'll need to re-colour layers to match the requirements of your own laser cutting house.