DWIN display brick recovery - ThomasToka/MarlinFirmware GitHub Wiki

ATTENTION: THIS IS A BRICK RECOVERY IN THE CASE THAT THE KERNEL AND UI FILES WERE DEMAGED!!! THIS IS NOT A RECOVERY FOR THE USUAL: I SEE THE STARS ON THE DISPLAY AFTER A NORMAL UPDATE. PLEASE ONLY USE AT YOUR OWN RISK. IF YOU ARE UNSURE PLEASE ASK IN THE DISCORD AND PRESENT YOUR SITUATION!

To recover the DWIN display from a brick use the following instructions:

• create a DWIN_SET folder on your fat32, 4096kb units size formatted micro sd card
• copy both files inside the DWIN_SET folder:

https://github.com/ThomasToka/MarlinFirmware/blob/Firmware-Binaries/T5L_OS_DGUS2_V10(no%20RX8130).BIN https://github.com/ThomasToka/MarlinFirmware/blob/Firmware-Binaries/T5L_UI_DGUS2_V43_20211021.zip (unpack this and put the bin also into the DWIN_SET folder)

• start your printer

after this you can flash the DWIN_SET folder from the release folder.