NimWC should not be exposed directly to the internet. Therefore it is recommended to setup a reverse proxy in front of it. This wiki shows how to use Nginx.

Nginx is a web server which can be used as a reverse proxy with a high‑performance and low CPU use.

The main Nginx configuration file is (normally) located here /etc/nginx/nginx.conf. If you are using the configurations below, you do not need to edit this file.

The sites served through Nginx are located in /etc/nginx/sites-enabled/default. You can either remove, make a backup or comment out everything in this file and insert the data below.

sudo mv /etc/nginx/sites-enabled/default /etc/nginx/sites-enabled/default.bak
sudo nano /etc/nginx/sites-enabled/default

The following config is using SSL. If you are going to serve your website without SSL (not recommended), change the port to 80 and remove/comment out the SSL specifications.

Insert the data below into /etc/nginx/sites-enabled/default. Change the <domain> with your domain or IP-address. Read the comments with # and make the appropriated changes. The config files is also available inside the devops-folder.

server {
  listen 443 ssl;
  server_name <domain> www.<domain>;

  # These lines will be added by Certbot (next step). If Certbot does not add them - then uncomment the lines and check that the path matches
  #ssl on;
  #ssl_certificate /etc/letsencrypt/live/<domain>/fullchain.pem;
  #ssl_certificate_key /etc/letsencrypt/live/<domain>/privkey.pem;

  location / {
    root   /home/user/nim_websitecreator/public; # Edit this path to your NimWC folder

    if ($request_uri ~* ".(ico|css|js|gif|jpe?g|png|svg)$") {
      expires 10d;
      access_log off;
      add_header Pragma public;
      add_header Cache-Control "public";
    }

    server_tokens off;
    add_header X-Frame-Options SAMEORIGIN;
    add_header Strict-Transport-Security "max-age=31536000; includeSubDomains";
    add_header X-Content-Type-Options nosniff;
    add_header X-XSS-Protection "1; mode=block";

    proxy_pass http://127.0.0.1:7000;
    proxy_set_header Host $host;
    proxy_set_header X-Real-IP $remote_addr;
    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
    proxy_set_header X-Forwarded-Proto $scheme;
  }
}

You need to load your newly modified config file, if Nginx is already up and running.

Check you config file

sudo nginx -t

This commands should tell you, that there's no errors. If there's any error, fix them before continuing.

Load the new config

sudo nginx -s reload

Secure Sockets Layer (SSL) is a standard security technology for establishing an encrypted link between a server and a client. It is highly recommended to use if you are exposing NimWC to the internet.

The following guide utilize Certbot, which is a Python tool to simplify the installation of SSL certificates. Please note that the Certbot versions below are specific for Nginx.

We will use Let's Encrypt for the SSL certificate. Normally your certificates will be placed here /etc/letsencrypt/live/<domain>.

Use your package manager (apt install certbot-nginx, sudo pacman -S certbot-nginx, etc.) or visit https://certbot.eff.org/all-instructions for installation instructions.

Remember that your router must have port 80 open for Let's Encrypts challenge

Change the <domain> with your domain.

sudo certbot --nginx -d <domain> -d www.<domain>