PMIX - TheTechnobear/SSP GitHub Wiki
pmix : performance mixer
a performance mixer for the Percussa SSP
Documentation
Note: This is the primary page for documentation on this modules
- Wiki - https://github.com/TheTechnobear/SSP/wiki/PMIX
- Forum - https://forum.percussa.com/t/pmix-performance-mixer-by-thetechnobear
Developer: TheTechnobear
I develop these plugins for free, please consider supporting my efforts with a donation. https://ko-fi.com/thetechnobear
Parameters
| Name | Desc |
|---|---|
| Level 1-8, Main,Cue,Aux 1-2 | level control for channel to main |
| Pan 1-8, Main,Cue,Aux 1-2 | pan control for channel |
| Cue 1-8, Main,Cue,Aux 1-2 | level control for channel to cue |
| Aux 1 1-8, Main,Cue,Aux 1-2 | level control for channel to aux 1 |
| Aux 2 1-8, Main,Cue,Aux 1-2 | level control for channel to aux 2 |
| Gain 1-8, Main,Cue,Aux 1-2 | Input gain of channel |
Inputs
| Name | Desc |
|---|---|
| In 1-8 | input signals |
Outputs
| Name | Desc |
|---|---|
| Main L/R | main stereo output |
| Cue L/R | cue stereo output |
| Aux 1 L/R | aux 1 stereo output |
| Aux 2 L/R | aux 2 stereo output |
Buttons
| Name | Desc |
|---|---|
| Mute 1-8, Main,Cue,Aux 1-2 | mute channel |
| Solo 1-8, Main,Cue,Aux 1-2 | solo channel |
| Cue 1-8, Main,Cue,Aux 1-2 | cue channel |
| AC, Main,Cue,Aux 1-2 | is channel AC/audio , if so remove DC offset |
| IN14, OUT14,IN58 | select channels for input, toggle and momentary |
General Usage
8 input channels with individual pan/mute/solo and levels for main,cue , aux 1 and 2
4 stereo output channels, main/cue and aux1/aux2, with levels, mute,solo
LS/RS/UP : select in 1-4, 5-6 and output groups for encoders and buttons
EN+/- : used to select what encoders control MODE : selects button mode
encoder buttons : reset or toggle levels etc.
CUE - mutes channel on main output, and moves it to CUE channel AC - places a DC blocker on the channel, useful for almost all audio signals - you can remove if you are doing DC mixing
note: CUE and AUX levels are only for input channels.
Tips
The channel selection buttons work as momentary switches, so you do not have to switch the focus, just hold button and use encoders.
Input levels are pre-fader (since levels are independent) Output levels are post-fader
DC mixing is possible, but vu-meters might be 'unexpected' ;)
GAIN is pre-fader
Change Log
- 2.0.0 release for new ssp image
- 1.4.1 release
- 1.4.0 early access release - midi learn
- 1.3.1 release, re-write using new infra and ui
- 1.3.0 early access release
- 1.0.1 Show channels if channels are enabled/disabled
- 1.0.0 Initial Release