DUAL - TheTechnobear/SSP GitHub Wiki
DUAL - dual module
loads two modules side by side with a 'small' UI (like the XMX)
Documentation
Note: This is the primary page for documentation on this modules
- Wiki - https://github.com/TheTechnobear/SSP/wiki/PVCA
- Forum - https://forum.percussa.com/t/midi-tools-modules-by-thetechnobear
Developer: TheTechnobear
I develop these plugins for free, please consider supporting my efforts with a donation. https://ko-fi.com/thetechnobear
Parameters
none
Inputs
| Name | Desc |
|---|---|
| M1 In 1-8 | Module 1 (left) inputs |
| M2 In 1-8 | Module 2 (right) inputs |
Outputs
| Name | Desc |
|---|---|
| M1 Out 1-2 | Module 1 (left) outputs |
| M2 Out 1-2 | Module 2 (right) outputs |
General Usage
This module can load TWO module, one on the left (module 1) and a second on the right (module 2). you can use the left/right buttons to switch between the two, and use shift buttons to load modules.
DUAL then maps the relevant dual inputs onto the loaded modules input. simply mapping 1 to 8. and in reverse, maps the first two outputs of a module to DUALs outputs.
Tips
This was primarily designed for using with TRAX where we are able to assign inputs and outputs to individual modules. however, often other modules will have suitable mapping. useful, where you dont need access to a full UI.
Limitations
Input and output mappings are fixed, to first 8 for inputs and first 2 for outputs on modules.
Change Log
- 1.0.0