GUI and Key Inputs - TheG2/34401test_withPlotCal GitHub Wiki

This will explain the key input. Images to be added once the best image hosting approach for git wikis is researched.

VISA IDs: Upper left corner, Two TextBoxes. Get the VISA resource IDs from the "explorer" for the VISA suite your are using, then enter the visa IDs for the DMM and ESG in the text box, then hit Open/INIT.

RF SWEEP PARAMs: Small text boxes for the start, stop, and step are used for the sweep params. Use the radio button to choose the sweep type. This group of controls in on the center of the form below the visa IDs..

CONFIGURE SWEEP: The command button with text "CONFIGURE" the right of the textboxes for the sweep params send the configuration params to the ESG.

PERFORM MEASUREMNT (SINGLE SWEEP): The command button with text "MEASURE" with INITialize a single sweep on the ESG. There is audible feeback on the DMM and both display if it all working.

BATCH TEST: The command button with text "BATCH" in the lower half on the screen will attempt to read in a text file with test definition into a list, then iterate through the list reconfiguration for each test, and initializes the test.

main form (https://73.162.230.202:488/34401DMM_ESG_MainForm.png)