SD Stuff - TeensyUser/doc GitHub Wiki

SD Connectors

T3.X

TBD

SD Connector for Teensy 4

• HFW8R-1STE1LF
• SFW8R-2STE1LF
  Fits the solder pad layout on the teensy 4 but the lock tabs are a little too wide to fit between the header pins if used. The tabs are only plastic though and can be trimmed with a sharp knife/scalpel (see post)

It is expected that a Teensy 4.1 will be released that uses a Teensy 3.5/3.6 form factor and will include a micro-SD card reader.

Alternatives for bringing out the SD card pins on the Teensy 4.0.